Cast Copper Heater Description:
Cast copper heaters are mainly used for extrusion and casting moulding machines, which have a wide application in various machinery industries. The operation temperature can reach up to 650°C (bronze). In order to concentrate the heat to one direction on the injection face, the other sides of the product are covered by heat retention and heat insulation materials. So it has advantages such as advanced technology, high heat retention, long lifetime, etc. It is widely used in plastic extrusion, chemical fibre, blowing moulding machines.
Different sizes and watt density of heaters are available. Our cast copper heaters are customized according to your specifications.
|
Model |
Dimension(mm) |
Voltage(V) |
Power(W) |
|
LK-ZT-Φ360Χ180 |
Φ360Χ180 |
230 |
10000 |
|
LK-ZT-Φ180Χ70 |
Φ180Χ70 |
250 |
2000 |
|
LK-ZT-Φ250Χ100 |
Φ250Χ100 |
380 |
4000 |
|
LK-ZT- L150XW110XH180 |
L150XW110XH180 |
250 |
4000 |
|
LK-ZT- L100XW52XH100 |
L100XW52XH100 |
230 |
1000 |
|
LK-ZT-Φ360Χ180 |
Φ360Χ180 |
230 |
10000 |
|
Key technical indexes |
|
1. Use condition: The environment temperature - 20 ~ + 60, relative temperature < 80%
2. Leakage current :< 0.5 MA
3. Insulation resistance: ≥ 8M
4. Grounding resistance: < 0.1
5. Voltage resistance: no electric breakdown for 1 minute under 1500V
6. Temperature endurance: 500-900°C
7. Power deviation value: +8%-8% |
Cast Copper Heater Application
l Injection and Blow Molding
l Extruders
l Molds & Dies
l Packaging machinery
l Medical equipments
l Thermoforming equipmen
Cast Copper Heater Types
Packaging and Shipping
Packaging: cast copper heater in plywood case outside if needed.
Shipment: 1.small quantity by DHL, FEDEX 2.Bulk goods by Sea Freight. 3. Arranged to your order
Our Service
Order Guide
Please specify the following when ordering.
1. The inner diameter (mm) and length (mm) of heaters
2. Thickness of heaters
3. Terminal length (max & min) and the distance of terminal length
4. The diameter, length of cooling tubes and the distance between them.
5. Voltage and power density
6. Gap of two pieces if applicable
7. Wiring type and position
8. Whether need air blowers
9. Content of the stamping if needed
10. Order quantity
11. Delivery date
* It’s better to provide us with the drawings/pictures
Others: position of terminal box, the position and size of the hole for connecting t
hermocouple OR of the incision, whether need to cast in the terminal.
Certificates
